Carcasă lagăr cu flanșă Timken UCFL315
Flanged Mounted Bearing
Vedeți informațiile tehniceVezi documenteleReferințe
Timken:UCFL315
Rubix:d488877
EAN:0013992172259
rezumat tehnic
| Diametrul interior | 75 mm |
|---|---|
| Lățime | 89 mm |
| Distanța de fixare de la centru la centru | 260 mm |
Documente
Detalii produs : UCFL315 TIMKEN - TIMKEN UCFL315 2-BOLT FLANGED UNIT
Puncte forte
•UCFL two-bolt flanged units are suggested for industrial
applications where heavy loads are encountered
This series is primarily designed for applications where the
mounting area is restricted
Each unit comes assembled and ready for mounting, using
bolts through the flange
These units use wide inner ring ball bearings with self-
aligning spherical outside diameters that compensate for
shaft misalignment
Timken UCFL series housed units feature the Timken
set screw locking (UC) bearing insert
Bearing pre lubricated and ready for immediate installation
Grease fitting supplied for relubrication(1)
The bonded seal design is well-suited for applications
involving wet or dirty environments
Bolt-hole spacing dimensions and shaft center location are
interchangeable with competitive units
Housing designed for ease of bearing replacement
applications where heavy loads are encountered
This series is primarily designed for applications where the
mounting area is restricted
Each unit comes assembled and ready for mounting, using
bolts through the flange
These units use wide inner ring ball bearings with self-
aligning spherical outside diameters that compensate for
shaft misalignment
Timken UCFL series housed units feature the Timken
set screw locking (UC) bearing insert
Bearing pre lubricated and ready for immediate installation
Grease fitting supplied for relubrication(1)
The bonded seal design is well-suited for applications
involving wet or dirty environments
Bolt-hole spacing dimensions and shaft center location are
interchangeable with competitive units
Housing designed for ease of bearing replacement
Aplicații
Involving Wet or Dirty Environments
Informații tehnice
atribute
| Diametrul interior | 75 mm |
|---|---|
| Lățime | 89 mm |
| Distanța de fixare de la centru la centru | 260 mm |
| Înălțime | 320 mm |
| Lungime | 195 mm |
| Serie | ucfl 200 |
| Lățimea totală a rulmentului | 66 mm |
| Diametrul găurilor de fixare | 35 mm |
| Numărul de găuri | 2 |
| Sarcină statică de bază, radială - C0r | 77200 N |
| Sarcină dinamică de bază, radială - Cr | 113000 N |
| Greutate | 11.3 kg |
A arăta UNSPSC / ECL@SS
- Disponibil – Data livrării la cerere