Inserții de frezare Sandvik Coromant N331.1A-08 45 20E-KM3040

    Insert

    Vedeți informațiile tehnice

    Referințe

    Sandvik Coromant:N331.1A-08 45 20E-KM3040
    Rubix:d645715
    Producator:7295534
    EAN:7323221989057
    brand logo

    rezumat tehnic

    Nuanță/nuanțăn
    Materialcarbid
    Vezi toate Caracteristice

    Detalii produs : N331.1A-08 45 20E-KM3040 SANDVIK - N331.1A-08 45 20E-KM3040 SANDVIK

    CoroMill® 331, insert for face and end milling

    Informații tehnice

    atribute
    Nuanță/nuanțăn
    Materialcarbid
    Dimensiune insert2 mm
    • Disponibil – Data livrării la cerere

    Descoperiți produsele noastre din categoriile asociate.

    R300-2570M-PM4230 SANDVIK - R300-2570M-PM4230 SANDVIKN331.1D-136520E-PM1030 SANDVIK - N331.1D-136520E-PM1030 SANDVIKN331.1A-084508H-WMH13A SANDVIK - N331.1A-084508H-WMH13A SANDVIKL331.1A-054523H-WL1030 SANDVIK - L331.1A-054523H-WL1030 SANDVIKR245-12T3M-PL1010 SANDVIK - R245-12T3M-PL1010 SANDVIKN331.1A-115008H-PL4240 SANDVIK - N331.1A-115008H-PL4240 SANDVIK390R-070212E-ML 1040 SANDVIK - 390R-070212E-ML 1040 SANDVIKR390-18 06 16H-PL 1130 SANDVIK - R390-18 06 16H-PL 1130 SANDVIKQD-NF-0250-020M-PM 4340 SANDVIK - QD-NF-0250-020M-PM 4340 SANDVIK327R12-28 20002-GMM 1025 SANDVIK - 327R12-28 20002-GMM 1025 SANDVIKRCHT09T300-PL1025 SANDVIK - RCHT09T300-PL1025 SANDVIKR390-11 T3 08E-PL 1030 SANDVIK - R390-11 T3 08E-PL 1030 SANDVIKR215.44-090208-AAHH10F SANDVIK - R215.44-090208-AAHH10F SANDVIKL331.1A-11 50 40H-WM1130 SANDVIK - L331.1A-11 50 40H-WM1130 SANDVIKL331.1A-043515H-WL1030 SANDVIK - L331.1A-043515H-WL1030 SANDVIK